What Are The Main Features Of The Bus Bar Riser
This article discusses the installation of busbars, the connection of busbars to generator sets. First of all let's have a look at how busbars work. Busbars are a flexible flat rack that is fixed in a particular location and provides one or more cable links between racks and generator sets. Usually one cable links each rack and each set of generator sets. To connect or disconnect cable links from busbars to generator sets it is very simple. This article describes what is busbar trunking system, the way a busbar is connected, and finally the role of busbar riser cabling.
Installation of bus bars to generators can be made easier by the use of approved drawing for this purpose, which is widely available in the market. If you are going to use an approved drawing for installation then the installation process becomes simpler. To check out more about buy Taiwan RHI Flexible Copper Busbar have a look at our webpage. It is important to note here that the approved drawing must comply to all federal and state laws and regulations. The selected drawing must also be compatible with the rack and generator set. It is also important to note that the approved drawing must conform to the guidelines issued by wiring organizations such as National Electric Code Board (NEC).
The second step is to prepare the equipment for installation, which includes preparing the mechanical and electrical configuration as per the requirements of the manufacturer. Some of the steps include preparing the mechanical and electrical foundation as per the instructions of the manufacturer. In addition to that de barres machine needs to be prepared for the installation. After preparing everything it is time to start installation.
The first thing is to select the right cable for the busbars. In this case the cable should be the Teflon coated cable for the smooth functioning. The cables should be connected to busbars and then they should be fastened with the help of clamp device. At this stage it is important to note that in case you are using steel cable then you need to use galvanized steel clamps for the installation.
The next step is to install the busbars to the shaft with the help of clamp device and cable ties. The next step is to attach the busbar to shaft. The final step is to secure the busbar to shaft with cable ties and clamp device. Once the entire system has been installed then it is time to test the system. When the power required by the busbar is supplied to it then it should display a power reading.
If you have planned the duct for the purpose of installing busbars then you should note that for the installation of busbars and the installation of cable trays there should be an experienced professional for this job. If you are having installed the power system for the duct in your building then you must note that even after the installation of the cable trays the busbars can still be destroyed. The reason for destroying the busbars is due to the moisture. So it is always advisable that in case you install the cable trays and cable drums in a proper manner then there will not be any kind of problems for the busbars. Therefore if you are getting the service for installation of the duct in your building then you should also ensure that the installation is done by a professional.